B737 MAX series

Full scale replica of Boeing 737 MODE CONTROL PANEL

14 custom made switches with dual color legends: white backlighted text and neutral indicator with green light status. This, like in the real aircraft, allows high visibility only when in active status.
3 round pushbuttons to select CO, ALT INT and SPEED INT functions.
Electromagnetic Auto Throttle ARM switch with green led indicator.
Custom high resolution warm white backlighting frontplate.
White color LED 7 segment Displays for Altitude, VS, Heading, IAS, Left and Right Course.
New Grayhill® High torque Optical encoders
Aluminium dust-coated knobs (with symbols on course knobs).
Bank angle selector with high reliability swiss made dual concentric HDG-SEL knobs (10°, 15°, 20°, 25°, 30°).
Ambient light sensor for display brightness regulation.
External or internal backlight brightness regulation.
External AT disengage.
16 bit flash memory technology to upgrade the built-in operating program (for eventual future improvements and expansions).
Central unit for daisy-chained connection of Efis selector (Captain and F/O), Mip and radios.
Ethernet Interface (Ethernet cable provided), 6Vdc 1A power supply (provided).
Compatible with Flight Simulator 2020, Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D ( V1, V2, V3, V4 and V5), Project Magenta, PROSIM737, PMDG737NGX(NGXu), iFly737.
Internal ethernet bootloader for easy upgrade.

Full scale replica of Boeing 737 MODE CONTROL PANEL

Electromagnetic disengage Auto Throttle ARM switch.
Custom high resolution Warm white backlighted frontplate.
White color LED 7 segment Displays for Altitude, VS, Heading, IAS, Left and Right Course.
Aluminium powder-coated knobs (with symbols on course knobs).
Dual concentric HDG-SEL knobs with 5 positions BANK ANGLE limit selector (10°, 15°, 20°, 25°, 30°).
External or internal display and backlight brightness regulation.
External AT disengage.
Central unit for daisy-chain connection of Efis selector (Captain and F/O), Mip and radios
USB Interface (USB cable provided), 6Vdc 1A power supply (provided)
Compatible with Flight Simulator 2020, Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D ( V1, V2, V3, V4 and V5), Project Magenta, PROSIM737, SimAvionics, PMDG737NGX(NGXu), iFly737, LVLD767, xPlane.

Full scale replica of Boeing EFI737MAX selector.
Custom high resolution backlighting frontplate.
Triple concentric devices for MINS and BARO regulation.
RADIO/BARO and IN/HPA are two positions 60° index rotary switches.
MINS and BARO regulation (middle knobs) are real as in the aircraft.
RST and STD pushbuttons (inner buttons) have a separate shaft to guarantee a correct label orientation.
Double concentric devices for the MODE and RANGE commutators.
4 position MODE rotary selector (30°)
RANGE commutators (30°) to increase or decrease the range scale.
TFC and CTR pushbuttons (inner buttons) have a separate shaft to guarantee a correct label orientation.
Compatible with Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D (V1, V2, V3, V4 and V5), Project Magenta, PROSIM737 MAX version.
Fixing clamp and 5 pole connection cable lenght ( 70 cm - provided).

Plug & play system to connect directly to the MIP737MAX structure.

Frontplate with warm white backlight.
Switches, pushbuttons and annunciators are already installed and working.
MIP737ICS3 MAX FULL mudule is provided with full operative Landing Gear Lever
Compatible with Flight Simulator 2020, Flight Simulator X (also Steam Edition) , Prepar 3D (all versions ), PROSIM737 MAX version. Compatible also with NG aircraft using Project Magenta, PMDG737NGXu, iFly737, LVLD767, XP11, XP12 ( Zibo737 thought Midwest737simulation driver).
No need any configuration file or script.
MIP737ICS3_MAX FULL is an expansion module and requires MCP737PRO/PRO2/PRO3/NG-MAX or MCP737EL to operate.

Plug & play system to connect directly to the MIP737MAX structure.

Frontplate with warm white backlight.
Switches, pushbuttons and annunciators are already installed and working.
MIP737ICS3 MAX CAP mudule is provided with full operative Landing Gear Lever
Compatible with Flight Simulaotor 2020, Flight Simulator X (also Steam Edition) , Prepar 3D (all versions ), PROSIM737 MAX version. Compatible also with NG aircraft using Project Magenta, PMDG737NGXu, iFly737, LVLD767, XP11, XP12 ( Zibo737 thought Midwest737simulation driver).
No need any configuration file or script.
MIP737ICS3_MAX CAP is an expansion module and requires MCP737PRO/PRO2/PRO3/NG-MAX or MCP737EL to operate.

Plug & play system to connect directly to the MIP737MAX structure.

Switches, pushbuttons and annunciators are already installed and working.
MIP737ICS3 MAX FO mudule is provided with full operative swithces, pushbuttons and annunciators
Compatible with Flight Simulaotor 2020, Flight Simulator X (also Steam Edition) , Prepar 3D (all versions ), PROSIM737 MAX version. Compatible also with NG aircraft using Project Magenta, PMDG737NGXu, iFly737, LVLD767, XP11, XP12 ( Zibo737 thought Midwest737simulation driver).
No need any configuration file or script.
MIP737ICS3_MAX FO is an expansion module and requires MIP737ICS3_MAX to operate.

Plug & play system to connect directly to the MIP structure.
No need of any configuration file or script
Frontplate with warm white backlight.
Main Panel backlight regulator
Background and AFDS Flood brightness regulator
Compatible with Flight Simulaotor 2020, Flight Simulator X (also Steam Edition) , Prepar 3D (all versions ), PROSIM737 MAX version. Compatible also with NG aircraft using Project Magenta, PMDG737NGXu, iFly737, LVLD767, XP11, XP12 ( Zibo737 thought Midwest737simulation driver).
No need any configuration file or script.
MIP737ICS3_MAX_CPT_LO is an expansion module and requires CPflight MCP737PRO/PRO2/PRO3/NG-MAX or MCP737EL to operate.

MIP737ICS3_MAX_FO_LO is an expansion of MIP737ICS3_MAX_CPT_LO panel
No need of any configuration file or script
Frontplate with warm white backlight.
FO Main Panel backlight regulator
Ground Proximity guarded switches
Sys Test pushbutton, GRD PROX and RUNWAY KORRY annunciators
All the Korry annunciators include the test function.
Compatible with Flight Simulaotor 2020, Flight Simulator X (also Steam Edition) , Prepar 3D (all versions ), PROSIM737 MAX version. Compatible also with NG aircraft using Project Magenta, PMDG737NGXu, iFly737, LVLD767, XP11, XP12 ( Zibo737 thought Midwest737simulation driver).

Frontplate with warm white backlight.
Switches, pushbuttons and korry annunciators are already installed and working.
Working and backlighted Brake Press gauge.
Compatible with Flight Simulator 2020, Flight Simulator X (also Steam Edition) , Prepar 3D (all versions ), PROSIM737 MAX version. Compatible also with NG aircraft using Project Magenta, PMDG737NGXu, iFly737, LVLD767, XP11, XP12 ( Zibo737 thought Midwest737simulation driver).
No need any configuration file or script.
EDC737 MAX is an expansion module and requires MCP737PRO/PRO2/PRO3/NG-MAX or MCP737EL to operate.

Display resolution 1200x1200
Ethernet connection
High intensity LED Backlight
RST pushbutton
APP pushbutton
HP/IN pushbutton
+ and -pushbutton to regulate the display brightness
Encoder for altimeter setting
Encoder pushbutton for STD setting
Compatible with Project Magenta and Prosim737
Configuration menù for automatic firmware upgrade, change ip, DHCP or static ip
No need video output from the PC
Power supply and Ethernet cable provided

TQ Throttle Quadrant motorized replica for Boeing 737-8200 MAX Style flight simulators
Compatible with: Prosim737 - XP 11/12 - P3DV5/6 - Fs2020

Seat737 Ng-Max replica scala 1:1

Full scale replica of Boeing 737MAX Central Unit Display, look and functionality are reproduced with high details. CDU737PRO-MAX is an ethernet connection hardware and use TCPIP protocol to interface with the used addon.

CDU737PRO-MAX is equipped with:

- Backlighted custom made keyboard
- Own 640x480 color display (No need to connect to any video output of your PC)
- Ethernet cable to allow you to connect the CDU737PRO to your LAN
- 12 Vdc 2 A Power supply
- Fastners and dzus to fix to your structure
- Compatible with Prosim737, Project Magenta, PMDG737ngx, PMDG737ngxu ( P3D and FS2020 version) and iFly737 (P3D version).
- Compatible also with XP11 and XP12 using MidWest737Simulations driver.
To know more about the CDU compatibility with a specific add-on aircraft please refer to the technical and documents section

Full scale replica of Boeing 737 OVERHEADMAX FWD panel.
Frontplate with warm white backlight.
Electromagnetic START SWITCHES
Electromagnetic YAW-DAMPER, WING ANTI-ICE and VOICE RECORDERswitches
Pushbutton for annunciator test.
OVH737MAX_FWD is supplied with all the gauges.
DVM display with green digit.
Display characteristics: LED 7 segment. Digit height: 0,3" (7,6 mm).
Displays: FLT ALT and LAND ALT white digit.
2 encoders to set FLT ALT and LAND ALT.
Encoders characteristics: Half million cycle rated, 32 increment for rotation (with detent).
High reliability switches with locking lever (where required).
12Vdc 5A power supply adapter (provided)
Ethernet Interface (Ethernet cable provided).
Compatible with Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D ( V3, V4 and V5), Project Magenta, PROSIM737, PMDG737NGX, iFly737.

Please note that the delivery time of this product could change, normally is between 1 and 3 weeks.

B737FWD Overhead Panel Cover

B737AFT Overhead Panel Cover

Glare Side737 ( NG and MAX version ) Captain side
ABS material black mattè painted
Backlihgted MIC and Clock pushbutton
Ready to use with SIDE737 module

Glare Side737 ( NG and MAX version ) FO side
ABS material black mattè painted
Backlihgted MIC and Clock pushbutton
Ready to use with SIDE737 module

SIDE board with CP and FO Warnings and SIXPACK.
Plug & play module that allows to connect the glareshield warnings.
Flat cables to connect the warnings are provided.
Compatible with Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D ( V1, V2 and V3), Project Magenta, PROSIM737, SimAvionics, PMDG737NGX, iFly737, LVLD767, XP11 ( only ZIBO737 ).
SIDE737 is an expansion module and requires MCP737EL or MCP737PRO/PRO2 to operate.

SIDE board ( without warnings )

Pedestal Bay case for RADIO modules.

Our MULTI737 disposes of:

• 12 yellow displays 7 segments, to visualize radio frequencies
• 1 encoder for HF sensitivity
• High quality dual concentric encoders with custom made knobs for the frequency selection.
• 5 pole cable, fasteners and screws provided (optional 1/4 turn original fastners)
• Control lights indicating the radio selected and 1 for the Radio Arm
• 9 backlighted pushbuttons with related led indicating which radio has been selected:
• VHF1
• VHF2
• VHF3
• HF1
• HF2
• AM
• TRANSFER
• OFF
• TEST

Full scale replica of Boeing 737 MULTI MODE NAV control panel

Warm white backlight,
LCD display ( 18x64 dot) with yellow digit
Realistic design with real size dimensions
Custom made keyboard
Direct daisy-chain connection to MCP737 through single 5 pole cable (provided)
Compatible with Flight Simulator X and Prepar3D through Project Magenta, PROSIM737 software ( Version V2 and V3 ) and PMDG737ngx & NGXu series.
Easy jumper selection to set MMNAV1 or MMNAV2 functionality
5 pole connection cable ( 70 cm - provided )
The module is provided with aluminium fasteners, screws and nuts (optional 1/4 turn original fastners)
MULTI MODE NAV CONTROL PANEL is an expansion module and requires MCP737EL or MCP737PRO/PRO2/PRO3/NG to operate.

Full scale replica of Boeing 737 navigation radio

Warm white backlight, yellow digit and dual concentric encoder
Realistic design with real size dimensions
Custom made aluminium knobs
Direct daisy-chain connection to MCP737 through single 5 pole cable (provided)
Compatible with Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D ( all releases ), Project Magenta, PROSIM737, SimAvionics, PMDG737NGX, iFly737, LVLD767, xPlane.
Easy jumper selection to set NAV1 or NAV2 functionality
5 pole connection cable ( 70 cm - provided )
The module is supplied with aluminium fasteners, screws and nuts (optional 1/4 turn original fastners)
NAV737 is an expansion module and requires MCP737EL or MCP737PRO/PRO2 to operate.

Full scale replica of Boeing 737 communication radio

Realistic design with real size dimensions
Warm white Backlight, yellow digit and dual concentric encoder
Direct daisy-chain connection to MCP737 through single 5 pole cable (provided)
Easy jumper selection to set COM1 or COM2 functionality
Compatible with Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D ( V1, V2 and V3), Project Magenta, PROSIM737, SimAvionics, PMDG737NGX, iFly737, LVLD767, xPlane.
5 pole connection cable ( 70 cm - provided )
The module is supplied with aluminium fasteners, screws and nuts (optional 1/4 turn original fastners)
VHF737 is an expansion module and requires MCP737EL or MCP737PRO/PRO2 to operate.

Full scale replica of Boeing 737 ADF radio

Warm white backlight, yellow digit and dual concentric encoder
Realistic design with real size dimensions
Backlighted text in the display area for ADF/ANT selections
Direct daisy-chain connection to MCP737 through single 5 pole cable (provided)
Easy jumper selection to set ADF1 or ADF2 functionality
5 pole connection cable ( 70 cm - provided )
The module is supplied with aluminium fasteners, screws and nuts (optional 1/4 turn original fastners)
Compatible with Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D ( all releases ), Project Magenta, PROSIM737, SimAvionics, PMDG737NGX, iFly737, LVLD767, xPlane.
ADF737 is an expansion module and requires MCP737EL or MCP737PRO/PRO2 to operate.

Full scale replica of Boeing 737 transponder radio

Warm white backlight, yellow digit and double dual concentric encoder
Realistic design with real size dimensions
Backlighted text in the display area for ATC 1/2 selections
Direct daisy-chain connection to MCP737 through single 5 pole cable (lenght 70 cm - provided)
5 pole connection cable ( 70 cm - provided )
The module is supplied with aluminium fasteners, screws and nuts (optional 1/4 turn original fastners)
Compatible with Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D ( all releases ), Project Magenta, PROSIM737, SimAvionics, PMDG737NGX, iFly737, LVLD767, xPlane.
ATC737 is an expansion module and requires MCP737EL or MCP737PRO/PRO2 to operate.
Frequency, STBY and IDENT functions compatible with IVAO.

Full scale replica of Boeing 737 Trim panel

Warm white backlight
Backlighted Rudder knob
LCD graphical display
Direct plug CPflight daisy chain (CPflight MCP required )
5 pole connection cable (70 cm - provided )
The module is supplied with aluminium fasteners, screws and nuts (optional 1/4 turn original fastners)
Compatible with Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D ( V1, V2 and V3), Project Magenta, PROSIM737, SimAvionics, PMDG737NGX, iFly737, LVLD767, xPlane.
TRIM737 is an expansion modules and requires MCP737EL or MCP737PRO/PRO2 to operate.

Full scale replica of Boeing 737 Fire panel

Warm white backlight
Handles with lift-UP/LEFT/RIGHT positions and "Hard Click" feeling
Locking mechanism with automatic unlock and manual override pushbuttons
All switches and pushbuttons are operating
All annunciators are operating
Direct plug CPflight daisy chain (CPflight MCP required)
The module is supplied with aluminium fasteners, screws and nuts (optional 1/4 original turn fastners)
Compatible with Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D ( V1, V2, V3, V4 and V5), Project Magenta, PROSIM737, PMDG737NGX, iFly737. Please check our section "Technical and documents".
FIRE737 is an expansion module and requires MCP737EL or MCP737PRO/PRO2/PRO3/NG-MAX to operate.

Full scale replica Boeing 737 MAX of CP & FO Audio Selector panel

Warm white backlight
High quality backlighted pushbuttons and MIC selectors
The module is supplied with aluminium fasteners, screws and nuts (optional ¼ turn fastners)
10 bit resolution for volume regulation on each channel
16 potentiometers with latching push functions and illuminated knob
1 high quality locking lever, 1 R/T- I/C 3 position momentary switch, 1 ALT/NORM 2 position switch, 1 VBR 3 position rotary selector.
Direct daisy-chain connection to MCP737 through single 5 pole cable (70 cm provided).

Full scale replica Boeing 737 CARGO panel

Warm white backlight
Directly plug CPflight daisy chain (CPflight MCP required)
5 pole connection cable (70 cm-provided)
The module is supplied with aluminium fasteners, screws and nuts. (optional 1/4 turn original fastners)
Compatible with Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D ( V1, V2 and V3), Project Magenta, PROSIM737, PMDG737NGX, iFly737.

Full scale replica Boeing 737 WXR panel

Warm white backlight
Direct plug CPflight daisy chain (CPflight MCP required)
5 pole connection cable (70 cm-provided)
The module is supplied with aluminium fasteners, screws and nuts ( (optional 1/4 turn original fastners)
Compatible with Flight Simulator X, Flight Simulator Steam Edition, Prepar 3D ( V1, V2,V3,V4 and V5) if used with Project Magenta, PROSIM737 V3 or PMDG737NGX or NGXu.
11 not latching pushbutton
2 lacthing pushbutton
2 knobs with dual shaft potentiometer to regulate left and right side

Full replica of brightness regulation module

6vdc 2 A power supply adapter
3,5 lenght mt 5 pole cable (dedicated)
High realism panel with warm white backlight
1 Knob for the pedestal backlight brightness regulation
1 Knob for the eventual FLOOD (on the dedicated terminal block).
2 sockets to connect SELCAL/CABDOOR737
1 DIN 5 pole socket for the connection to the CPflight MCP737
3 DIN 5 pole socket to connect all the other pedestal panels
Supplied with aluminium fasteners, screws and nuts (optional 1/4 turn original fastners and backlighted knob)
100% scaled
Backlighted knobs
Works with all CPflight MCP versions.

CABDOOR737 reproduces the analogous module present on the 737NG pedestal.

2 positions stab trim switch with guard
High realism panel with warm white backlight
Contact input for "CABIN DOOR" status
2 annunciators, "LOCK FAIL"- "AUTO UNLOCK"
1 three positions commutator, "UNLOCKED"- "AUTO"- "DENY"
1 flat cable (integrated) used to connect to the BRT737NG panel.
Supplied with aluminium fasteners, screws and nuts (optional 1/4 turn original fastners)
100% scaled
Works with all CPflight MCP versions.

The SELCAL737 reproduces the analogous panel present on the 737NG pedestal.

5 warning pushbuttons: VHF1, VHF2, VHF3, HF1 and HF2
5 warm white annunciators
Supplied with aluminium fasteners, screws and nuts (optional 1/4 turn fastners)
1 flat cable (integrated) to connect SELCAL panel to the BRT737NG.

XSmall pedestal cover (146 X 56) for Pedestal Bay

Small pedestal cover (146 X 66) for Pedestal Bay

Medium pedestal cover (146 X 94) for Pedestal Bay

Large pedestal cover (146 X 113) for Pedestal Bay

SIXPACK recall annunciator for CP side (Common Anode) - NOT SUITABLE for MIP737SE connection.

SIXPACK recall annunciator for FO side (Common Anode). NOT suitable for MIP737SE.

SIXPACK recall annunciator for CP side (Common Cathode) - SUITABLE for MIP737SE connection

SIXPACK recall annunciator for FO side (Common cathode)

Full aluminium anosided sixpack recall annunciator with 1 mt cable provided to your MIP737SE or interface board. COMPATIBLE WITH MIP737SE.

Desktop bracket for MCP737 + Left EFIS selector.

MIP Bracket for MCP737+Captain and F/O EFIS

MIP737 MAX window frame