EFI320PRO_CPT

Full replica of A320 Captain EFIS selector

• Warm white backlighting frontplate.
• Backlighted pushbuttons.
• Pushbuttons legend backlight color: white.
• Pushbuttons active status LED color: green.
• Original Grayhill® Optical encoder with PUSH/PULL function
• Altimeter regulation knob in aluminum dust-coated (with symbols).
• Display color: warm white.
• Dual concentric Knob (external knob for inHg / hPa exchange).
• 16 bit Flash microcontroller.
• 4 pole socket for daisy chain connection to FCU320PRO.
• Plug&play Connection to FCU320PRO, no need any configuration.

CPflight EFIS320PRO_CPT is a full-scale replica of the AIRBUS EFIS selector ( Captian side ).
The module is complete and ready once connected to the FCU320PRO hardware using a 4 wires cable ( provided ). No need for any configuration.
Is compatible with FS2020 and P3D using Prosim A320, Project Magenta and JeeHell A320
Logics, operating modes and aircraft behavior are managed by the PC software.
EFIS320PRO_CPT is equipped with high-quality level components like the original Grayhill® optical encoder with PUSH/PULL;
The altimeter regulation knob is made in aluminum dust-coated with symbols. The module has warm white backlight.
Is always warmly suggested to install the CPflight driver, this will put on your PC the test FCU and EFIS application. This application is very useful to setup and testing the hardware. ( Recommended for the first setup). In this case you will be able to make the first test to check if all is ok before use the module with your installed addon. Please read carefully to the manual for more information.